Plating grade ABS resin/special engineering ABS plastic/Painted and plated applications Sabic CYCOLAC ABS MG37EPX resin
Product Description
CYCOLAC acrylonitrile-butadiene-styrene (ABS) thermoplastic resin is widely recognized as a tailorable engineering material offering outstanding aesthetics, flow, toughness, dimensional stability, and high temperature resistance. A broad portfolio of CYCOLAC resin grades offer platability, VISUALFX™ aesthetics, high heat, medical compatibility, plus flame-retardancy that meets regulatory and safety standards. High gloss grades offer enhanced aesthetic appeal.
Product Description |
ABS plating grade optimized for a broad processing window for both painted and plated applications. |
General | |
Material Status | |
Availability | |
Features | |
Processing Method | |
ASTM & ISO Properties 1 |
Physical | Nominal Value | Unit | Test Method |
Density | 1.05 | g/cm³ | ISO 1183 |
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 21 | g/10 min | ASTM D1238 |
Molding Shrinkage - Flow (0.126 in) | 4.0E-3 to 6.0E-3 | in/in | Internal Method |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 401000 | psi | ISO 527-2/1 |
Tensile Stress (Yield) | 7030 | psi | ISO 527-2/5 |
Tensile Stress (Break) | 5740 | psi | ISO 527-2/5 |
Tensile Strain (Yield) | 2.1 | % | ISO 527-2/5 |
Tensile Strain (Break) | 16 | % | ISO 527-2/5 |
Flexural Modulus 2 | 359000 | psi | ISO 178 |
Flexural Stress 2, 3 | 10600 | psi | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact Strength 4 | | | ISO 180/1A |
-40°F | 2.9 | ft·lb/in² | |
-22°F | 3.9 | ft·lb/in² | |
73°F | 11 | ft·lb/in² | |
Thermal | Nominal Value | Unit | Test Method |
Heat Deflection Temperature 5 (264 psi, Unannealed, 2.52 in Span) | 180 | °F | ISO 75-2/Af |
Vicat Softening Temperature | 209 | °F | ISO 306/B50 |
CLTE - Flow (-40 to 104°F) | 3.3E-5 | in/in/°F | ISO 11359-2 |
CLTE - Transverse (-40 to 104°F) | 3.3E-5 | in/in/°F | ISO 11359-2 |