Specifications
1.pom plastic raw material
2.injection molding
3.25kg/bag
4.factory price
Features:
1) Excellent mechanical strength;
2)High hardness strength;
3)High wear resistance;
4)Self-lubrication;
5)Higher modulus;
6)Chemical resistance and etc.
High abrasion resistance
Low coefficient of friction
High heat resistance
Good electrical and dielectric properties
Low water absorption
Test Item | Test condition | Test method(ASTM) | Units | Test Data |
Water absorption | 23°C60%RH | ASTM D-570 | % | 022 |
Melt flow rate | - | ASTM D-1237 | g/10min | 9 |
Mold shrinkage | Transverse | - | % | 20 |
Specific Gravity | - | ASTM D-792 | g/cm3 | 1.41 |
Tensile strength | 1.6mm | ASTM D-1822 | KJ/m2 | 98 |
Elongation | 23°C | ASTM D-638 | % | 50 |
Tensile strength | 23°C | ASTM D-638 | MPa | 62.3 |
Flexural strength | 23°C | ASTM D-790 | MPa | 91.2 |
Rockwell hardness | - | ASTM D-785 | M scale | 80 |
Notch impact strength(Izod) | 3.2mm | ASTM D-256 | J/M | 54 |
Flexural modulus | 23°C | ASTM D-790 | GPa | 2.62 |
Tearing strength | 2mm | ASTM D-732 | MPa | 54.9 |
Melting point | 10°C/min | ASTM D-3418 | °C | 225 |
Flammability | - | UL94 | - | HB
|
Appli
Mo
